PRODUCT SPOTLIGHT
Replace Your Broken Glass Scales with DSG/DMG

Replace Your Broken Glass Scales with DSG/DMG

Many shops will be will more willing to replace a single defective scale on an existing DRO vs. replacing the entire system, if that will get them up and running. Newall's DSG and DMG ...


NEWALL NEWS
There are currently no events.
APPLICATION STORY
The Stanford Linear Accelerator Center Goes Linear

At Stanford’s SLAC Linear Accelerator Laboratory in Menlo Park California, we find the two-mile long linear accelerator, also known as the Linac. The Linac is used to drive a Coherent Light...


DRO Encoders: MAG-TS Magnetic Tape Encoder

MAG-TS’s performance, design characteristics and ease of installation make it ideally suited for metal fabrication, sawing, woodworking and general  measurement applications.

Newall’s MAG-TS encoder consists
of a reading head that travels along
a magnetically encoded tape. The tape is made of a ferrous backing affixed to a flexible magnetized rubber substrate that is protected by a stainless steel cover strip.

Angular Readings on a Rotary Table
The flexibility of the MAG-TS encoder allows you to mount the tape around the circumference of a rotary table on a boring mill.  Angular readings can now be displayed with the use of Newall’s DP1200 or SA-100R DRO.

Electrical Specifications
Electrical Code: Incremental
Supply Voltage: 5VDC +/-5%
Current:  Typ. 150mA (250mA max.)
Output Format:  Differential TTL (RS-422)
Reference Mark:  Selectable
Resolution: 10µ (0.0005”)
Measurement Speed: 2Mhz
Operating Temp: 0-50º C
CE Compliant: Yes

 

Mechanical Specifications
Reader Head Dim.:
51L x 24W x 26H  (2.0”L x 0.94”W x 1.02H) 
Pole Pitch: 2mm
Environmental Rating:  IP67
Max. Length: 20M (65.6’)
R.H. Gap Height: 0.5 ±0.02mm  (0.02” ±0.007”)
R.H. Pitch and Yaw Tolerance: ±1º
Accuracy: +/-25µ (±0.001”)
Cable: 3.5 meter SS armor with 9-Pin D style
(M) connector

Download MAG-TS Data Sheet
Download MAG-TS Installation Guide


Mounting
The MAG-TS can be mounted directly to the machine surface by using the provided adhesive strip. Alternatively, the tape can be attached to an optional backer bar that is then mounted to the machine surface. The reader head should be mounted such that the correct gap height (0.5mm +/- 0.02mm) is maintained along the entire travel of the machine. 

The MAG-TS tape should not make contact with a magnetic stand or permanent magnet during installation, use, or maintenance.  Permanent damage may occur.



Search Newall
Search For: 

Exact Matches Only